Gallery of Project Photos: Difference between revisions

From Wayne's Dusty Box of Words
No edit summary
No edit summary
Line 1: Line 1:
[[File:Bead Profile.jpg|thumb|none]]
<gallery mode="slideshow" widths=250px showthumbnails caption="Ambry Project in Process">
[[File:Carcass Back Front.jpg|thumb|none]]
File:Bead Profile.jpg|Close up of the bead profile
[[File:Carcass Back.jpg|thumb|none]]
File:Carcass Back Front.jpg|Front view of carcass with back attached
[[File:Carcass No Back.jpg|thumb|none]]
File:Carcass Back.jpg|Back view of carcass with back attached
[[File:Chisels and Rasps.jpg|thumb|none]]
File:Carcass No Back.jpg|view of carcass before the back was attached
[[File:Complete Back.jpg|thumb|none]]
File:Chisels and Rasps.jpg|A selection of my chisels and rasps for this project. Most work was done with the 12mm single bevel straight chisel.
[[File:Complete Front.jpg|thumb|none]]
File:Complete Back.jpg|Back view of the (almost) completed project
[[File:Complete Side.jpg|thumb|none]]
File:Complete Front.jpg|Front view of the (almost) completed project
[[File:Complete Top 2.jpg|thumb|none]]
File:Complete Side.jpg|Side view of the (almost) completed project
[[File:Door in Progress.jpg|thumb|none]]
File:Complete Top 2.jpg|Top view of the (almost) completed project
[[File:Face Frame Mortised.jpg|thumb|none]]
File:Door in Progress.jpg|The last part, the door.
[[File:Hammer and Nails.jpg|thumb|none]]
File:Face Frame Mortised.jpg|The blank face frame mortised together and ready for detail work.
[[File:Hollow Plane 2.jpg|thumb|none]]
File:Hammer and Nails.jpg|Rosehead cut nails as I used in the project and a hand-forged hammer to drive them home.
[[File:Rasping.jpg|thumb|none]]
File:Hollow Plane 2.jpg|The hollow plane I used to form the bead molding.
[[File:Router Plane.jpg|thumb|none]]
File:Rasping.jpg|Cleaning up the saw cuts with a rasp. Working vertically with a 2-handed grip helped a lot.
File:Router Plane.jpg|I used this router plane setup to plow the groves that form the basis of the bead molding.
</gallery>

Revision as of 16:56, 5 December 2020

  • Ambry Project in Process
  • Close up of the bead profile

    Close up of the bead profile

  • Front view of carcass with back attached

    Front view of carcass with back attached

  • Back view of carcass with back attached

    Back view of carcass with back attached

  • view of carcass before the back was attached

    view of carcass before the back was attached

  • A selection of my chisels and rasps for this project. Most work was done with the 12mm single bevel straight chisel.

    A selection of my chisels and rasps for this project. Most work was done with the 12mm single bevel straight chisel.

  • Back view of the (almost) completed project

    Back view of the (almost) completed project

  • Front view of the (almost) completed project

    Front view of the (almost) completed project

  • Side view of the (almost) completed project

    Side view of the (almost) completed project

  • Top view of the (almost) completed project

    Top view of the (almost) completed project

  • The last part, the door.

    The last part, the door.

  • The blank face frame mortised together and ready for detail work.

    The blank face frame mortised together and ready for detail work.

  • Rosehead cut nails as I used in the project and a hand-forged hammer to drive them home.

    Rosehead cut nails as I used in the project and a hand-forged hammer to drive them home.

  • The hollow plane I used to form the bead molding.

    The hollow plane I used to form the bead molding.

  • Cleaning up the saw cuts with a rasp. Working vertically with a 2-handed grip helped a lot.

    Cleaning up the saw cuts with a rasp. Working vertically with a 2-handed grip helped a lot.

  • I used this router plane setup to plow the groves that form the basis of the bead molding.

    I used this router plane setup to plow the groves that form the basis of the bead molding.

Retrieved from "https://wayneprecht.org/wiki3/index.php?title=Gallery_of_Project_Photos&oldid=1283"